The method of adjusting the forming pressure of briquette briquetting machine is as follows:
1. The briquette ball press uses a spiral or disc spring to resist the floating bearing seat, and adjusts the compression of the spring to control the actual pressure when the material is formed.
2. The hydraulic pump presses the oil into the oil cylinder, and the oil cylinder resists the floating bearing seat of the briquette ball press, and the actual pressure of the material is controlled and fed back through the pressure gauge display.
3. Set the strength of the screw of the briquette ball press in advance. The actual pressure of the material cannot be reflected and controlled when the machine is running. This equipment has a simple structure, low manufacturing cost and low price.
4. Check the current and voltage of the briquette ball press machine to see if the coal powder and other materials are too dry.
