Ball press equipment is commonly used equipment in mining enterprises. Some ball press equipment sometimes needs to work outdoors. The outdoor environmental conditions are quite atrocious compared to indoors. Therefore, the waterproof treatment of ball press equipment working outdoors must be done. it is good.
Winter and summer maintenance of mineral powder ball press-snowy in winter and rainy in summer. Relatively speaking, it should be relatively humid. Therefore, moisture-proof work should be done to reduce the rust of vulnerable parts. In addition, the weather is cold in winter, so you should do a good job of preventing cold and freezing.
The following mainly talks about the outdoor installation of the ball press equipment. The ball press equipment should be installed with waterproof sealing measures to prevent rainwater from entering from the interface. The selection of the ball press installation bracket is also very important. It is recommended to use the original bracket. The original bracket fully considers the waterproof problem. Even if water enters the bracket, it will only flow back into the column, and will not flow into the ball press.
Customers who work outdoors may have seen water droplets on the bracket. Generally speaking, the humidity is high during the day and water vapor enters the bracket. When the humidity decreases at night, the water vapor will condense into water droplets and condense on the walls of the bracket. When the bracket has no tilt design or is tilted in the opposite direction, water droplets will flow into the ball machine along the wall, causing harm. In order to reduce moisture, the joint between the bracket and the pole can be sealed with plasticine or silica gel. Water is the main cause of the rust of the ball press. Therefore, waterproofing is also a precaution for rust removal to ensure the smooth and stable operation of the ball press.
The waterproofing of the ball press is the work that we must do in the early stage. Next, we will talk about how to prevent the ball press equipment from rust.
Anti-corrosion paint: apply mineral oil, paint or fire enamel, spray plastic, etc. on the outer surface of iron products.
The second electroplating and hot-dip plating: use electroplating, hot-dip plating and other methods to coat the steel with a layer of non-rusting metals, such as zinc, tin, chromium, and nickel. The appearance of these metals can form a dense oxide film, thereby Prevent iron products from rusting when they come into contact with water, air and other substances.
The current production technology of ball press equipment is constantly improving with the advancement of industrial technology. I believe that Hongtao Machinery’s ball press equipment will become better and better in the future. The advancement of ball press technology will make the ball press waterproof and rust-proof. It becomes easier and simpler.
