Some users will encounter the problem of difficulty in falling off of the equipment when using the briquette briquetting machine during production, which also affects the normal production of the equipment, so if there is such a difficulty in falling off, where should we find the cause?
1. After the pellets manufactured by the briquette briquetting machine exceed the allowable limit value, the pellet structure of the briquette briquetting machine becomes brittle and bursts, and the original binder in the gap is also squeezed out, and the adhesion cannot be achieved. At the same time, it is difficult to demould the pressure ball;
2. The roller skin of briquette briquetting machine is of poor quality;
3. The material humidity is high, and the material humidity is likely to cause material blockage, which is not good for demoulding;
4. Uneven feeding, too much feeding at one time may cause material accumulation and affect normal demoulding;
5. The ball socket of the briquette ball press is too small. Generally, the diameter of the ball socket is controlled between 25-50mm. The smaller the socket, the less likely it is to fall off the ball;
6.the speed control of briquette briquetting machine is unreasonable.
