Since the dry powder briquetting machine produced by Zhengzhou Kehua Machinery Factory was put on the market, the sales volume has maintained a steady upward trend. However, in order to make our equipment better, our technicians have carried out energy-saving and efficiency-enhancing dry powder briquetting equipment on the original basis. The improvement, more effectively allows users to increase output on the original basis, and improve the purpose of income generation.
Dry powder ball press is a kind of ball making equipment, which continuously sends various dry and wet powder materials to the roller nip area of the strong dry powder ball press through the pre-pressing device. Under the pressure of the roller nip area, the dry and wet powder The materials are pressed into balls, which are mainly used in coal, mining, metallurgy, refractory and building materials industries. In order to reduce the manufacturing cost of the powerful dry powder ball press and make the appearance of the equipment beautiful and dry, we hereby improve the design of the ball press produced by our factory and reduce the cross-sectional size of the box. After the improved design, during the assembly and test run, it was found that the moving roller during manual cranking could not rotate, but the fixed roller could rotate easily; therefore, measures were taken to increase the reinforcement plate and the change-point support plate, which successfully solved the existing problems. Achieved ideal teaching results.
The dry powder briquetting machine produced by Zhengzhou Kehua Machinery Factory is mainly used for pelletizing and agglomerating non-ferrous and ferrous metal ore powder, directly into the furnace for smelting, increasing the added value.
1. The fundamental solution to increase the production output of the dry powder ball press is to improve the grinding system of the dry powder ball press to increase the efficiency of dry powder grinding. The increase in powder selection efficiency has a direct benefit that the fine powder of the finished product is selected in time to the greatest extent, reducing the return rate of the cement product and reducing the load of the cement energy-saving ball mill.
2. It can also reduce the load of the grinding system. The specific method is to add a fine crusher before the ball press. The fine crushing before grinding greatly reduces the particle size of the grinding material.
3. Improve the efficiency of the grinding system of the dry powder ball press machine, add a high-efficiency separator, the particle size of the material to be ground is reduced, and the efficiency of powder selection is improved. If the efficiency of the grinding system is low, it will not only affect the output of the ball mill, but also Affect the quality of coal powder. If the user's conditions permit, the above three methods are used in combination, and the effect is ideal. Any of these three methods can greatly increase the output of the dry powder ball press.
