The aluminum scrap briquetting machine is mainly used to directly cold-press aluminum sawdust and aluminum turning chip raw materials into cylindrical cakes of 1 to 4 kg under high pressure. The whole process does not require heating, additives, or other processes to facilitate storage and transportation. And reduce the loss in the process of recycling and reuse. It is suitable for casting related enterprises such as aluminum alloy profile factory, steel casting factory, aluminum casting factory, copper casting factory, auto parts and hardware. This series of equipment is classified into two types: large-tonnage vertical type and small-tonnage horizontal type.
The vertical model is a popularized model widely used nowadays, with a large design tonnage, a large output, and a wide range of applications; the horizontal model has the main cylinder placed horizontally and the seal is affected by gravity. After the design pressure increases, the seal The local abrasion of unbalanced force is large, and the service life is greatly reduced, which cannot meet the requirements of long-term continuous use of large output. Small-tonnage models are often used (design pressure should not exceed 2000KN), and the application range is small.
