Briquette machine is an indispensable equipment of energy saving and environmental protection in the process of modern industrial production. With the popularity of equipment, some common faults of briquette machine have become a topic of concern and discussion among many users. Today we focus on the interpretation of a common problem for the briquette machine- jam problem. So how is the briquette machine jam caused? What are the corresponding solutions?
The revolving speed of the briquette machine is too low. If the revolving speed of the briquette machine is too low during use briquette machine, it will lead to the material is not easy to demould, after that, it will cause material blocking and other phenomena.
Solutions: Increase the revolving speed of briquette machine. Generally, the speed should be maintained between 10 and 20 rpm.
Demoulding of special models is difficult. Some briquette machine users have some special requirements on the shape of the material pressed by the briquette machine, such as square, diamond and other special shape requirements. Due to the sharp edges and corners of these shapes, occasionally cause the ball press material blockage.
Solutions: Change molding standard to pillow shape, round shape and other easy to demoulding shape, if special shapes must be required, please contact the manufacturer.
Material supply is uneven. The uneven supply of materials is mainly reflected in the release of materials. When the quantity of materials is small, it will cause waste of resources caused by empty machine operation. When the materials are suddenly released too much, it will easily cause equipment blocking.
Solutions: The workers should communicate and coordinate, and make preparations before using the briquette machine, and place the material evenly.
