What is the effect of the forming pressure of the briquette briquette machine on the formation of the equipment? Why does the briquette briquette machine have a distinction between the forming pressure? Is the briquette briquette machine the greater the pressure, the better? Customers are all about these Doubtful. So how do you choose when considering the molding pressure, I hope the following content will help you.
The higher the molding pressure of the pellets made by the coal briquetting machine, the higher the strength of the pellets. When the molding pressure reaches or is less than 500kg/cm, the strength is positively related to the pressure. However, the pressure of briquette briquetting machine and other equipment is not as large as possible. When the pressure of pellets produced by briquette briquetting machine exceeds 500kg/cm, the strength and pressure are negatively related, especially the drop strength decreases. This is mainly due to the fact that the pellets made by the briquette briquetting machine exceed the allowable limitations, but the pellets are arranged to catalyze bursting, and some adhesives in the gaps are also squeezed out, and the bonding effect cannot be achieved. Therefore, there are also standards for how much pressure.
The molding pressure of the coal briquetting machine is the main factor that affects the hardness of the developed balls. The lack of pressure of the briquetting machine will cause the material to be unable to form or difficult to form, but the high pressure does not help the material forming. The material can increase the molding density through the combination of molding pressure and crushing particle size. However, although the molding pressure of briquette briquetting machine equipment can increase the physical density, too fine crushing particle size will cause the pellets to be too dense, which will also affect the physical density and cause the material to be extremely reversed. The phenomenon.
